SUPPLY TEMP14.2°C
STATIC PRESSURE248 Pa
SYSTEM AIRFLOW42,600 CFM
HVAC · Insulation · Ducting · Piping

Air, engineered
at building scale.

Airsense Engineers designs, fabricates and commissions complete ventilation systems for hotels, airports and large commercial developments — one accountable team from survey to commissioning.

HotelsAirportsHospitalsCommercial TowersRetail & MallsData Centers HotelsAirportsHospitalsCommercial TowersRetail & MallsData Centers

Four disciplines, one coordinated system

Every project runs through the same in-house teams, so ductwork, pipework, insulation and controls are designed to fit together — not bolted on afterward.

01 / HVAC

HVAC Systems

Heating, ventilation and air conditioning design sized to real occupancy loads — chillers, AHUs, VRF and rooftop units integrated as one system.

CAPACITY: 5–5,000 TR
02 / INSULATION

Insulation

Thermal and acoustic insulation for ductwork, pipe runs and building envelopes — reducing heat gain, condensation and mechanical noise.

R-VALUE: TO SPEC
03 / DUCTING

Ducting

Sheet-metal fabrication and installation of supply, return and exhaust duct networks, balanced and sealed to certified airflow standards.

STANDARD: SMACNA
04 / PIPING

Piping

Chilled water, condensate, refrigerant and steam piping — routed, pressure-tested and insulated for long-term reliability.

TEST: HYDROSTATIC

High-occupancy, high-stakes buildings

Guest comfort, air quality and uptime aren't optional in these buildings — our systems are designed around continuous operation.

Hospitality

Hotels & Resorts

Guest-room comfort zoning, kitchen exhaust, pool-hall dehumidification and quiet, low-vibration plant rooms across full-service properties.

Aviation

Airports

Terminal-scale air handling, pressurization control and smoke-management ducting for landside and airside facilities.

+ Other builds

Hospitals, Towers & Retail

Cleanroom-grade filtration, high-rise riser systems and mall-scale exhaust — sized for every floor plate.

AE
Since day one
One accountable team

"Every building we take on gets treated like it will run for thirty years — because it will."

Airsense Engineers was built to bring HVAC, insulation, ducting and piping under one accountable team, instead of splitting large projects across disconnected contractors. That approach now runs across hotel, airport and commercial projects, with every system engineered, fabricated and commissioned in-house from first survey to final airflow reading.

Survey to commissioning

The same four-stage sequence on every project, regardless of building size.

01
Site Survey
We measure the building as-built — loads, floor plates, plant space and existing services — before any drawing is produced.
02
System Design
HVAC, ducting, piping and insulation are modelled together, with load calculations and layouts issued for approval.
03
Fabrication & Install
Ductwork and pipework are fabricated off-site where possible and installed in sequence with other trades.
04
Commissioning & Handover
Every zone is balanced, pressure-tested and measured against design airflow before handover documentation is issued.
0Projects delivered
0Hotels & terminals fitted
0CFM engineered
24/7Commissioning support

Start with a site survey.

Tell us about the building and what needs conditioning. Our team will come back with a scope and rough budget before anything is signed.

Phone+91 9729334093
Emailairsenseengineers@gmail.com
OfficeSonipat, Haryana, IN
HoursMon–Sat, 09:00–19:00
Thank You